Last Papers

1. Laura Galuppi, Gianni Royer-Carfagni
   Cold-lamination-bending of glass: Sinusoidal is better than circular Composites Part B 79 (2015) 285-300
2. Gabriele Pisano, Gianni Royer-Carfagni
    The statistical interpretation of the strength of float glass for structural applications
   (Pre-Print submitted to Construction and Building Material)
3. Gabriele Pisano, Gianni Royer-Carfagni
   On the coaxial double ring test for float glass. Towards a new standardized configuration.
   (Pre-Print)
4. Laura Galuppi, Gianni Royer-Carfagni
   Analytical approach à la Newmark for curved laminated glass
   (Composites Part B 76 (2015) 65-78)
5. Laura Galuppi, Gianni Royer-Carfagni
   Enhanced Effective Thickness (EET) of curved laminated glass. (Pre-print)
6. Laura Galuppi, Gianni Royer-Carfagni
   Localized contacts, stress concentrations and transient states in bent-lamination with viscoelastic adhesion.
   An analytical study. (Pre-print)
7. Laura Galuppi, Gianni Royer-Carfagni
   Optimal cold bending of laminated glass.
   International Journal of Solids and Structures 67–68 (2015) 231–2
8. Laura Galuppi, Gianni Royer-Carfagni
   Shear coupling effects of the core in curved sandwich beams (Composites Part B 76 (2015) 320-331)
9. Speranzini E., Agnetti S.,
   “Strengthening of glass beams with steel reinforced polymer (SRP)”, Composites B 2014, 67:280-289.
   DOI: 10.1016/j.compositesb.2014.06.035, (2014)
10. Speranzini E., Agnetti S.,
    “The technique of digital image correlation (DIC) to identify defects in glass structures”, Struct Cont and Health Monit 2014, 21(6):2015-2029, DOI: 10.1002/stc.1629, (2014)
11. Agnetti S., Speranzini E.,
    “Hybrid steel-fiber reinforced glass beams - experimental and numerical analysis”, Challenging Glass 4 Conference & COST Action TU0905 Final Conference, 6 - 7 February 2014, EPFL, Lausanne, Switzerland, CRC Press/Balkema, the Netherlands. ISBN: 978-1-138-00164-0 (Hardback), pp. 211-218, (2014)
12. Speranzini E., Agnetti S.,
    “Evaluation of the Glass Beam Strength through the Failure Analysis”,
    Proc. of AIMETA2013, 17-20 September 2013, Torino, Italy, (2013)
13. Speranzini E., Agnetti S.,
    “Post-cracking Behaviour of Reinforced Glass Beams”, Proc. of the Conference on Structural Glass, 18th-19th April 2013, Porec, Croatia, CRC Press/Balkema, the Netherlands. ISBN: 978-0-203-79741-9 (Hardback), pp. 285-292, (2013)
14. Speranzini E., Agnetti S.,
    “Finite element analysis of “Reinforced Glass Beams”, Glass Performance Days, 31th Marzo, 1th Aprile 2012, Shanghai, China, pp. 204-209, (2012)
15. Speranzini E., Neri P.,
    “Structural Behavior of GFRP Reinforced Glass Beams”, Glass Performance Days, 18-20 June 2011, Tampere, Finland,
    pp. 604-609, (2011)
16. Speranzini E., Neri P.,
    "Structural Behaviour of Reinforced Glass". Glass Performance Days, Tamper, Finland, 12-15 June 2009, pp. 355-360, (2009)
17. Speranzini E., Neri P.,
    “On the bending of GFRP Reinforced Glass Elements”, Atti del Convegno Internazionale Asia-Pacific Conference on FRP in Structures, 12-14 December 2007, HongKong, 2007
18. Bedon C., Amadio C., Sinico A.
    "Numerical and analytical investigation on the dynamic buckling behavior of glass columns under blast"
    Engineering Structures 79(2014): 322-340
19. Bedon C., Amadio C.
    Exploratory numerical analysis of two-way straight cable-net façades subjected to air blast loads
    Engineering Structures 79 (2014), 276-289
    
20. Bedon C., Amadio C.,
    Flexural-torsional buckling behavior of eccentrically compressed laminated glass elements with viscoelastic PVB interlayer
    Journal of Structural Engineering, published online, doi: 10.1061/(ASCE)ST.1943-541X.0001128
    
21. Annalisa Franco, Gianni Royer-Carfagni
    Verification formulae for structural glass under combined variable loads
    Engineering Structures 83 (2015) 233–242 
22. Annalisa Franco, Gianni Royer-Carfagni
    Critical issues in the design-by-testing of glass structures
    Engineering Structures 99 (2015) 108–119
23. Bedon C, Louter C.
    Exploratory numerical analysis of SG-laminated reinforced glass beam experiments".
    Engineering Structures 75 (2014), 457-468
24. Bedon C, Amadio C
    FE assessment of dissipative devices for the blast mitigation of glazing façades supported by prestressed cables
    Structural Engineering & Mechanics 51 (1), (2014)
    
25. Bedon C, Amadio C
     Flexural-torsional buckling behavior of eccentrically compressed laminated glass elements with viscoelastic PVB interlayer
    Journal of Structural Engineering, Accepted, in print 
26. Bedon C, Amadio C
    Flexural-Torsional Buckling: Experimental Analysis of Laminated Glass Elements
    Engineering Structures 73 (8), 85-99 (2014)
27. Laura Galuppi, Simone Massimiani, Gianni Royer-Carfagni
    Buckling phenomena in double curved cold-bent glass
    (International Journal of Non-Linear Mechanics 64 (2014) 70–84)
    
28. Laura Galuppi, Gianni Royer-Carfagni
    Rheology of cold-lamination-bending for curved glazing
    (Engineering Structures 61 (2014) 140–152) 
29. Laura Galuppi, Gianni Royer-Carfagni
    Enhanced Effective Thickness of Multi-Layered Laminated Glass
    (Composites: Part B 64 (2014) 202–213)
    
30. Laura Galuppi, Gianni Royer-Carfagni
    Buckling of three-layered composite beams with viscoelastic interaction
    (Composite Structures 107 (2014) 512–521)
31. Laura Galuppi, Giampiero Manara, Gianni Royer Carfagni
    Erratum and addendum to ‘‘Practical expressions for the design of laminated glass’’
    [Compos. Part B: Eng. 45 (2013) 1677–1688] (Composites: Part B 56 (2014) 599–601)
32. Laura Galuppi, Gianni Royer-Carfagni
    The effective thickness of laminated glass: Inconsistenc of the formulation in a proposal of EN-standards  
    (Composites: Part B 55 (2013) 109–118)
33. Laura Galuppi, Gianni Royer-Carfagni
    The design of laminated glass under time-dependent loading
    (International Journal of Mechanical Sciences 68 (2013) 67–75)
34. Laura Galuppi, Gianni Royer-Carfagni
    Effective thickness of laminated glass beams: New expression via a variational approach
    (Engineering Structures 38 (2012) 53–67)
35. Laura Galuppi, Gianni Royer-Carfagni
    The effective thickness of laminated glass plates
    (Journal of Mechanicsof Materialsand Structures Vol. 7, No. 4, 2012)
36. Laura Galuppi, Giampiero Manara, Gianni Royer Carfagni
    Practical expressions for the design of laminated glass 
    (Composites: Part B 45 (2013) 1677–1688)
37. Laura Galuppi, Gianni Royer-Carfagni
    Laminated beams with viscoelastic interlayer
    (International Journal of Solids and Structures 49 (2012) 2637–2645)
38.  Sglavo V. M., Montenero A., Aielli M., Gnappi G., Lorenzi A., Royer Carfagni G.
    "Mechanical properties of PbO-ZnO-P2O5 glasses".
    (Physics and chemistry of glasses -European Journal of Glass Science and Technology Part B, 46(5), 2005, p. 538-554, 2005.)
39. Royer-Carfagni G., Silvestri M.,
    A proposal for an arch footbridge in Venice made of structural glass masonry.
    (Engineering Structures, 29(11), pp. 3015-3025, 2007)
40. Royer-Carfagni G., Silvestri M.,
    Fail-safe point fixing of structural glass. New advances.
    (Engineering Structures, 31, pp. 1661.1676, 2009)
41. Ferretti, D., Rossi, M., Royer-Carfagni, G.,
    An ESPI Experimental Study on the Phenomenon of Fracture in Glass. Is it brittle or Plastic?
    (Journal of the mechanics and physics of solids, 59, pp, 1338-1354, 2011)
42. Freddi, F., Royer-Carfagni, G., Silvestri, M.,
    Full-Scale Experiments for Point-Fixing Frameless Laminated Glass.
    (Int. J. of Appl. Glass Science, 1, pp. 257-272, 2010)
43. Beatini, V., Royer-Carfagni, G.,
    Glass as material, (Materia, 69, pp. 36-43, 2011)
44. Badalassi, M., Biolzi, L., Royer-Carfagni, G., Salvatore, W.,
    Calibration of partial safety factors for the structural design of glass, submitted, 2013. (Preprint 2013)
45. Collini L., Royer-Carfagni G.,
    Flexural strength of glass-ceramic for structural applications,
    (European Journal of Ceramics, In press, 2013)
46. Bedon C, Belis J, Luible A,
    Assessment of existing analytical models for the lateral torsional buckling analysis of PVB
    and SG laminated glass beams via viscoelastic simulations and experiments
    Engineering Structures 6 (2014), 165-176
47. Bedon C, Amadio C
    Buckling analysis of simply supported flat glass panels subjected to inplane uniaxial compressive and edgewise shear loads1
    Engineering Structures, 59: 127-140 (2014)
48. Amadio C, Bedon C
    Multiple dissipative devices for blast-resisting cable-supported glazing façades
    Modelling and Simulation in Engineering. Vol. 2013, Article ID 964910, 13 pages, 2013.)
    doi:10.1155/2013/964910 http://dx.doi.org/10.1155/2013/964910.
49. Amadio C, Bedon C
    An equivalent thickness for buckling verification of laminated glass panels under in-plane shear loads
    Journal of Civil Engineering Science (JCES), 2(3): 108-123,(2013)
    World Academic Publishing. ISSN: 227-4634 (print), 2227-4626 (online). www.ij-ces.org.
50. Amadio C, Bedon C
    A buckling verification approach for monolithic and laminated glass elements under combined in-plane
    compression and bending
    Engineering Structures, 52(6): 220-229 (2013)
51. Amadio C, Bedon C
    Corrigendum to “A buckling verification approach for monolithic and laminated glass elements under combined in plane compression and bending"
    [Eng.Struct. 52(6) 220-229]”. Engineering Structures, 57: 393 (2013)
52. Belis C, Bedon C, Louter C, Amadio C, Van Impe R
    Experimental and analytical assessment of lateral torsional buckling of laminated glass beams
    Engineering Structures, 51:295-305 (2013)
53. Amadio C, Bedon C  
    Dynamic response of cable-supported façades subjected to high-level air blast loads:
    numerical simulations and mitigation techniques
    Modelling and Simulation in Engineering, Hindawii Publishing Corporation, Volume 2012, Article ID 863235.
    ISSN:1687-5591 (print), 1687-5605 (online). DOI: 10.1155/2012/863235. (2012)
54. Amadio C, Bedon C
    Buckling verification of laminated glass elements in compression
    Journal of Civil Engineering Science (JCES), Volume 1, Issue 3, pp.90-101, World Academic (2012)
    Publishing. ISSN: 227-4634 (print), 2227-4626 (online). www.ij-ces.org.
55. Amadio C, Bedon C
    Blast analysis of laminated glass curtain walls equipped by viscoelastic dissipative devices”. Buildings, 2(3): 359-383. MDPI-Open Access Publishing (Basel, Switzerland) (2012)
    DOI: 10.3390/buildings2030359. http://www.mdpi.com/2075-5309/2/3/359
56. Amadio C, Bedon C
    Viscoelastic spider connectors for the mitigation of cable-supported façades subjected to air blast loading
    Engineering Structures, 42: 190-200.(2012)
57. Amadio C, Bedon C
    Elastoplastic dissipative devices for the mitigation of blast resisting cable-supported glazing façades
    Engineering Structures, 39: 103-115. (2012)
58. Bedon C, Amadio C
    Buckling of flat laminated glass panels under in-plane compression orshear
    Engineering Structures, 36: 185-197. (2012)
59. Amadio C, Bedon C
    Buckling of laminated glass elements in compression
    Journal of Structural Engineering, 137(8): 803-810 (2011)
60. Amadio C, Bedon C
    Buckling of laminated glass elements in out-of-plane bending
    Engineering Structures, 32(11): 3780-3788.(2010)
61. Bedon C, Amadio C
    Numerical buckling analysis of geometrically imperfect glass panels under biaxial in-plane compressive/tensile loads"
    Engineering Structures. Accepted, in print (2014)
62. Briccoli Bati S., Fagone M., Ranocchiai G. (2013).
    Experimental determination and numerical description of viscoelastic properties of glass interlayer.
    In: COST ActionTU0905, Mid-term Conference on Structural Glass.
    CRC Press/Taylor & Francis, 307- 315, COST Action TU0905,
    Mid-term Conference on Structural Glass, 18-19 april 2013, Porec, Croatia
    
63. L. Andreozzi, S. Briccoli Bati, M. Fagone, G. Ranocchiai, F. Zulli (2013).
    Analysis of environmental damage consequences on viscous thermo elastic properties of a polymer interlayer.
    In: Atti del XXI Congresso dell'Associazione Italiana di Meccanica Teorica e Applicata.
    Edizioni Libreria Cortina, 1 - 6, XXI Congresso AIMETA, 17-20 settembre 2013, Torino
    
64. L. Andreozzi, S. Briccoli Bati, M. Fagone, G. Ranocchiai, F. Zulli (2011).
    Mechanical characterization of viscous thermo elastic properties of a polymer interlayer by dynamic tests.
    1 - 8, XX Congresso dell’Associazione Italiana di Meccanica Teorica ed Applicata, 12-15 settembre, Bologna
    
65. L. Andreozzi, S. Briccoli Bati, M. Fagone, G. Ranocchiai (2010).
    Dynamic tests on laminated glass specimens.
    30 - 33, XXV A.T.I.V. International Conference. Glass - when technology meets design, 18-19 novembre 2010, Parma
    
66. S. Briccoli Bati, M. Fagone, G. Ranocchiai, L. Romoli (2009).
    The influence of the interlayer on the behaviour of laminated glass in the serviceability domain.
    722 -725, Glass Performance Days, 12-15 giugno 2009, Tampere, Finland
67. Briccoli Bati S., Fagone M., Ranocchiai G. (2009).
    The elastic behavior of a rubber-like material for composite glass.
    1 - 10, XIX Congresso dell’Associazione Italiana di Meccanica Teorica ed Applicata, 14-17 settembre, Ancona, Italy
    
68. S. Briccoli Bati, M. Fagone, G. Ranocchiai (2009).
    Analysis of the post-crack behaviour of a laminated glass beam.
    349 - 352, Glass Performance Days, 12-15 giugno 2009, Tampere, Finland
    
69. S. Briccoli Bati, M. Fagone, G. Ranocchiai (2007).
    The mechanical description of a rubber-like material for the evaluation of post-crack behaviour of laminated glass.
    1 - 14, XVIII Congresso Nazionale Associazione Italiana Meccanica Teorica e Applicata, 11-14 settembre 2007, Brescia